PTFE coated facade
Main application:
- Tensile roofs
- Complex building exterior
Major advantages:
- Long term aesthetics (Tropical climate compatibility)
- High natural light input
- High fire resistance
- Long term mechanical resistance
|
Technical properties (Type V) |
Standards |
| Coating |
PTFE |
|
| Yarn |
Glass yarn EC 3μ |
|
| Weight |
1000g/sqm |
EN ISO 2286-2 |
| Width |
380cm |
|
| Tensile strength (warp/weft) |
6000/5500 n/5cm |
EN ISO 1421 |
| Tear resistance (warp/weft) |
450/450 N |
DIN 53.363 |
| Adhesion |
80 N/5cm |
EN ISO 2411 |
♦The technical data here are average values with +/- 5% tolerance
Flame retardancy
| |
Technical properties |
Standards |
| Flame retardancy rating |
Bs1d0 |
GB 8624 (euroclass, chinese) |
♦Other fire certificates available on demand
Additional Information (Value after bleaching)
|
Technical properties |
Standards |
| Thickness |
0.60mm |
+/- 0.1mm |
| Standard format length |
～250m |
|
| Visible Light Transmittance (Tv) |
15% |
EN 410 |
| Visible Light Reflexion (Rv) |
84% |
EN 410 |
| Solar Transmittance (Ts) |
15% |
EN 410 |
| Solar Reflexion (Rs) |
78% |
EN 410 |
| Solar Factor (g) |
17% |
EN 410 |
| Heat transfer coefficient (vertical/horizontal) |
U= 4.7 / 5.5 W/㎡.K |
DIN EN ISO 6946 |
| Emissivity |
91% |
DIN EN ISO 6946 |
| UV transmittance (T uv) |
<1% |
EN 410 |
| LEED Heat Island Effect |
96% |
ASTM E 1980-01 (Approach II) |
| Solar Reflectance Index (SRI) |
- Certifications:ISO 9001
- Warranty:15-Year Warranty
- The buyer of our products is fully responsible for their application and their transformation with regard to any possible third party.
- The buyer of our products is responsible for their implementation and installation according to the standards, workmanship and safety regulations in force in destination countries.
- For information on our contractual warranty, please refer to the relevant terms and conditions.
- The values quoted above represent results of tests performed incompliance with common design practices and are provided for information only to enable customers to make the best use of our products.
- Our products are subject to changes based on technical advances and we reserve the right to modify their characteristics at any time.
- The buyer of our products is responsible for checking the validity of the above data.
