T-1300

PTFE Coated Facade

Main application:

  • Tensile roofs
  • Complex building exterior

Major advantages:

  • Long term aesthetics (Tropical climate compatibility)
  • High natural light input
  • High fire resistance
  • Long term mechanical resistance

Technical properties (Type V) Standards
Coating PTFE
Yarn Glass yarn EC 3μ
Weight 1300g/sqm EN ISO 2286-2
Width 380cm
Tensile strength (warp/weft) 7500/6000 n/5cm EN ISO 1421
Tear resistance (warp/weft) 500/500 N DIN 53.363
Adhesion 90 N/5cm EN ISO 2411

♦The technical data here are average values with +/- 5% tolerance

Flame retardancy

Technical properties (Type V)       Standards
Flame retardancy rating      B1
Class A
Class A
Pass
 DIN 4102-1
ASTM E 84
 ASTM E 108
  ASTM E 136 

♦Other fire certificates available on demand

Additional Information (Value after bleaching)

Technical properties (Type V) Standards
Thickness 0.80mm +/- 0.1mm
Standard format length ~200m
Visible Light Transmittance (Tv) EN 410
Visible Light Reflexion (Rv) 81% EN 410
Solar Transmittance (Ts) 13% EN 410
Solar Reflexion (Rs) 75% EN 410
Solar Factor (g)) 16% EN 410
Heat transfer coefficient (vertical/horizontal) U= 4.7 / 5.5 W/㎡.K DIN EN ISO 6946
Emissivity 90% DIN EN ISO 6946
UV transmittance (T uv) <1% EN 410
LEED Heat Island Effect 92% ASTM E 1980-01 (Approach II)
Solar Reflectance Index (SRI)

  • Certifications:ISO 9001
  • Warranty:15-Year Warranty
  • The buyer of our products is fully responsible for their application and their transformation with regard to any possible third party.
  • The buyer of our products is responsible for their implementation and installation according to the standards, workmanship and safety regulations in force in destination countries.
  • For information on our contractual warranty, please refer to the relevant terms and conditions.
  • The values quoted above represent results of tests performed incompliance with common design practices and are provided for information only to enable customers to make the best use of our products.
  • Our products are subject to changes based on technical advances and we reserve the right to modify their characteristics at any time.
  • The buyer of our products is responsible for checking the validity of the above data.